The delivery contains an antenna that has to be mounted on the Antenna port.
It can be replaced with other antennas for special use cases (e.g. directional antenna). Please note, that the antenna model has to be certified for blukii Hub.
USB-C is primarily used for power supply.
Additionally you can read the system logs via serial port. For more information please contact blukii support.
The Push button provides two features:
Short Press (less than 5 seconds): The Configuration Website can be accessed for a defined amount of seconds (see Configuration Access setting)
Long Press (more than 5 seconds): The WLAN Credential settings are removed and the blukii Hub is restarted. Then the blukii Hub Access Point will be activated.
The red LED signals the connection status:
On: Access Point is active
Blink fast: Connecting to WLAN
Blink slow: Connection to WLAN established
Off: Connected to WLAN
The green LED signals the operation status:
On: The Hub is started and busy.
Off: A data push request is currently running.
Both LEDs are slowly blinking: The hub is doing software update.